01
22 HP Primary Unit
The high-capacity workhorse at the center of the system, engineered to hold the cold even when ambient temperatures climb.
BLAST™ 150/30 · Engineered beyond ambient limits
Desert heat.
Unbroken
cold.
The BLAST 150/30: a purpose-built 22 HP + 6 HP cascade system with regenerative chilling—reliably continuing to chill your ethanol when the environment is anything but forgiving.
→ Sub-cooled for speed and reliability
22 HPPrimary stage+6 HPCascade stage
150 GALTank size
5 GPMSpeed
30 MINPull-down target
The system 01
Cold that refuses to compromise
Every component holds its ground against the heat.
Built for reliability, speed, and consistency. The system combines high-capacity primary refrigeration, a dedicated cascade subcooling stage, regenerative chilling, and centralized control for reliable, predictable operation.
02
6 HP Cascade Condenser
A dedicated cascade subcooling stage positioned beside the primary unit, with both grilles aligned for clean, parallel airflow.
03
Open FluxBox
Wall-mounted in Zone 2, as close as practical to the Zone 3 ethanol skid, ready for field insulation.
04
Integrated PLC
A clean, centralized control panel positioned beside the FluxBox—or anywhere within 40 feet in Zone 2.
PLC intelligence 02
by Agenticly Cool
Available now
Production capabilitiesLive today
01Remote monitoringLive visibility and alerts
02Historical trendsPerformance over time
03Predictive maintenanceEarlier service insight
04Automatic stagingCoordinated system control
05Remote serviceAccess and reports
Regenerative chilling 03
Useful cold, recovered
Make every degree of cold work twice.
Returning ethanol passes through additional heat-transfer surface, where it exchanges energy with the colder side of the loop before returning to the process tank.
01Reduce refrigeration loadReclaim useful cold before final pull-down.
02Limit temperature swingProtect the cold reserve from warm return flow.
03Chill fasterIncrease chilling capacity with more surface area and regeneration horsepower.
Outdoor configuration
Chill the chiller.
Break the heat barrier.
The 22 HP and 6 HP units operate as a cascade system, with the 6 HP stage acting like a “chiller for the chiller.” By subcooling the 22 HP, it allows the main compressor to discharge into a cold void instead of smashing into a wall of heat, delivering faster chilling, reduced strain, and reliable performance even in extreme ambient temperatures.
Aligned airflow →
Installation concept 04
Simple by design
A clear equipment location plan.
Final placement remains field-coordinated. Mirage 1.0 by Agenticly Cool brings the outdoor equipment, Zone 2 controls, and the Zone 3 ethanol process into one coordinated control environment.
Mirage 1.0by Agenticly CoolOne intelligent control system across all three zones
Zone 1Outdoor↓Zone 2Controls↓Zone 3Process
Zone 1Outdoor / rooftop · aligned airflow →
22 HP6 HPMirage coordinated system link
Zone 2Wall-mounted equipment
FluxBoxNearest practical point to Zone 3 Within 40 ft
PLCFlexible Zone 2 locationMirage-monitored hazardous location boundary
Zone 3Process area
Touchscreen controlLocal Zone 3 process interface
Built for the unforgiving
The hotter it gets,
the colder we think.
A desert ready system design from Perma Cool.